DRY POLYMER FEED SYSTEM
The Aries Tek Dry Feeder is a fully automatic system that wets out dry polymer and allows for aging of the polymer. Auto make up function to ensure you always have aged polymer ready for use.
General Specifications
- Stainless Steel Construction
- Hopper that holds about 75 pounds of dry polymer.
- A PLC-controlled auger that meters the polymer out at a predetermined rate to make up the proper dilution, as determined by the customer.
- Mixing educator for proper mixing.
- Flush system to keep the funnel clean.
- Flow switch to ensure water flow before feeding dry polymer.
- A 300-gallon aging tank with PLC controlled mixer.
- Auto Make up function: Float controlled to make up the next batch automatically.
Utilities
- Auger drive 0.5 HP 230/460 VAC.
- Mixer drive 0.75 HP 230/460 VAC.
- 30 Amp disconnect and E-Stop.
- Water required 15 to 25 GPM at 40 psi.
Options
- System can be furnished with a PLC and touch screen for operation of the dry feeder and other processes.
- With a VF to control a polymer feed pump. Controlled either from a switch on the panel or the touch screen.
- For other options contact the factory.
